TS-Optics Adaptor from M48x0,75 to T2 - low profile
Este adaptador de bajo perfil permite la conexión de accesorios T2 a adaptadores con rosca macho M48x0,75.
- Rosca hacia el telescopio: M48x0,75 - Rosca de filtro de 2 "(rosca hembra)
- Hilo hacia la cámara: T2 - Hilo M42x0,75 macho
- Longitud óptica solo 3,5 mm
- La combinación del tubo de extensión óptico TSVF230 con el adaptador TSM48-T2 proporciona un adaptador focal de 2 "a T2, ¡sin longitud óptica!
TS-Optics Low Profile Adaptor from M48 filter thread to T2
This adaptor is a typical "problem solver", if you want to reduce from M48 to T2. In specific, it reduces a M48x0,75 male thread to a T2 (M42x0,75) male thread.
What makes this adaptor special is its low profile. Its optical length (not counting the male thread) is only 3,5mm. This results in a very short M48 female thread (2,5mm), which should be taken into consideration when planing the adaptation of your image train.
A special combination using our M48 extension tube TSVF230 (pls see photo)
Connecting the TSM48-T2 adaptor with the TSVF230 extension tube gives you a Focal Adaptor from 2" to T2 without safety groove.
The Focal Adaptor´s optical length is 0 !! Millimeters because it slots in entirely. It won´t get any shorter.
If the TSVF215 is used instead of the TSVF230, the thread will rotate. If you insert an M48ABSTIMMA1 in between, this will be avoided. However, the TSM48-T2 can then no longer be pushed into the 2" receptacle because the tuning ring acts as a stop.
Female thread: | M48x0,75 - 2" filter thread - 2,5 mm length |
Male thread: | T2 (M42x0,75) - 3 mm length |
Optical length (not counting the male thread): | 3,5mm |